Melt-blown non-woven fabric equipment is different from general textile fabric processing machinery. During normal operation, the melt-blown non-woven fabric equipment must not only ensure that the equipment runs at a uniform speed, but also always pay attention to the stability of the melt-blown fabric equipment. If a serious failure is found In case of failure, it is necessary to immediately stop the operation of the melt-blown cloth equipment.

When the melt-blown nonwoven fabric equipment is suddenly powered off during normal operation, if the material inside the extruder barrel is not discharged in time, it will cause the equipment to fail to operate normally, requiring electric heating or gas welding torches and other tools to heat the melt at high temperature, but it is easy to damage the equipment. 

Therefore, immediately turn off the main switch of the melt-blown cloth equipment after a power failure, turn the motor of the melt-blown cloth equipment manually with a belt or a rocker, and try to discharge the internal materials to minimize the residue in the barrel.

Usually, when the melt-blown nonwoven fabric equipment cannot be operated, the following methods are used:

1. Check the procedure and restart the melt-blown cloth equipment according to the correct operation sequence.

2. Check the main motor circuit.

3. Check whether the lubricating oil pump is started, and check the status of the interlocking device related to the main motor. The oil pump cannot be turned on, and the motor cannot be turned on.

4. Turn off the main power supply and wait for 5 minutes to restart the melt-blown cloth equipment.

5. Check whether the emergency button is reset.

 

When the melt-blown nonwoven fabric equipment fails to operate normally, the equipment can usually be shut down for a period of time and then restarted for 10 to 30 seconds. If the melt-blown cloth equipment has a serious failure problem after this time, the power supply should be cut off quickly to check the cause of the failure.

AZX summarizes the countermeasures for the abnormal operation of the above meltblown non-woven equipment according to professional suggestions. If it is a more complicated problem, you still need to seek professional help. Otherwise, it is very easy to cause equipment accidents and even affect personal safety.

AZX is a professional manufacturer of non-woven equipment, we have won praise and trust from many customers with our excellent technology and high-quality products. We put the needs of our customers first, the equipment we produce meets strict standards, and we also have a professional quality inspection system to strictly control the weight of each link of production. If you are interested in our meltblown non-woven equipment, please contact us immediately!