The meltblown non-woven fabric production line has a reasonable structure and is easy to operate. The entire production line has a high degree of automation. The equipment layout and width of the production line can also be designed according to the user site and the width of the actual product. The following is the specific operating procedure of the meltblown non-woven fabric machine.

Turn on the start-stop switch and the power switch, and the built-in indicator light of the power switch lights up.

The air pressure valve is under the workbench. Open the door of the melt-blown cloth equipment to view the air pressure valve. Adjust the pressure according to the actual situation. When certain mechanisms are out of sync, increase the pressure. The working air pressure is generally adjusted within the range of 0.2~0.6MPa.

(1) Turn on the power switch of the ultrasonic generator, and then press the "sonic test" switch. If the indicator of the amplitude indicator rises sharply and exceeds 100, it means that the frequency is too far from the resonance point, and the "sound wave adjustment" knob must be adjusted. To view the amplitude display, use the left hand (no more than 3 seconds) to press the sound wave check switch, and then use the right hand to turn the sound wave adjustment knob to adjust the amplitude display pointer to the lowest point.

When making adjustments, if the indication of the amplitude indicator is not falling but rising, please turn the "sonic adjustment" knob in the opposite direction. After adjusting the sound wave, tighten the wing nut and close the protective cover.

(2) During the no-load test, if the "overload indicator light" is on, it means that there is a problem with the melt-blown cloth equipment. At this time, it is not allowed to start work, you must shut down and check the cause, and then start work after troubleshooting.

Check whether the cooling fan is working properly to ensure that the meltblown non-woven fabric machine can work for a long time during operation.

If a fault is found during the operation, we must first shut down the machine, and then deal with the fault in time to prevent equipment accidents. If you want to know more about the meltblown non-woven fabric machine after reading the above content, you can contact us for related solutions.

As a professional manufacturer of spunbond non-woven production lines, we have many years of production and manufacturing experience. We have a strict quality management system and a complete quality inspection system, which can provide you with safe and high-quality products. Our professional design and management team can also provide you with thoughtful service and effective solutions. If you want to buy our high-quality meltblown non-woven fabric machine, please contact us immediately!