The production process of the meltblown non-woven fabric production line requires the cooperation of various devices, and different configurations have different functions, constituting each link in the production line. The following are the main configurations and functions of the meltblown non-woven production line.

The diameter of the screw is generally 100~120mm, and the length/diameter ratio is 30. Its purpose is to melt the slices.

Its function is to accurately measure, control the output and the fineness of the fiber, as a gear pump, continuously transport the melt to the spinneret.

Its function is to filter out the impurities in the melt to avoid clogging the spinneret holes.

The melt-blown fiber is evenly received and spread on the net and transported forward. There is a suction fan under it to discharge the hot air coming down from the top.

This is the key equipment of the melt-blown process. There is a strip-shaped spinneret with a long row of spinneret holes, generally about 1500 nozzle holes per m length. The two sides of the spinneret are equipped with hot air nozzles, and there are hot air nozzles underneath, which form a 50bangle with the nozzle holes. After the fiber is ejected, the high-speed hot air is used to stretch the airflow immediately to blow the fiber off and become a superfine fiber.

It is composed of 3 measuring hoppers, which are used to measure white slices, masterbatch, and additives. These three components enter the mixing and agitator below to mix evenly, and then put into production.

Provides the temperature and pressure of the hot air used in the spinning air stretching process. It is heated by electricity and consumes a lot of power.

Pack the meltblown cloth in rolls. Meltblown nonwovens are characterized by ultra-fine fibers, and the smallest fiber diameter can be achieved, generally between 1 and 5Lm. The finer the fiber, the better the quality of the meltblown cloth, but the output is relatively reduced. Because the fiber is superfine, its specific surface area is large, and the adsorption capacity is strong, which is the most prominent advantage of melt blown cloth.

We should always check the meltblown non-woven fabric production line equipment before and after the operation. If there is any wear, we should maintain it in time to avoid malfunctions during the operation of the meltblown nonwoven machine. If you want to know more about the problems of the meltblown nonwoven production line after reading the above content, you can contact us for more detailed solutions.

As a professional manufacturer of spun-bonded non-woven production lines, we have accumulated many years of manufacturing experience in this field. We have established a complete quality control system to ensure product quality. Our professional technical team and advanced equipment can meet customer needs. If you want to buy our high-quality meltblown non-woven equipment, please contact us immediately!